Technical Specification
|
General |
|
|
Welding processes |
MIG/MAG - MMA - TIG DC Lift |
|
Materials |
Carbon steels - Stainless Steels - Aluminium - Copper |
|
Dimensions L x W x H |
485 x 210 x 400 mm |
|
Weight |
12.8 kg |
|
|
|
|
Power supply |
|
|
Voltage (50/60 Hz) |
1 x 230Vac ± 15% |
|
Maximum input power |
5.7 kVA |
|
Maximum input current |
24.7 A |
|
Power factor PF |
1 |
|
Efficiency |
85 % |
|
Slow blow line fuse |
25A |
|
Open circuit voltage |
58Vdc |
|
IP protection rate |
IP23S |
|
Insulation class |
H |
|
Power supply cable |
3 x 2.5 mm2 - 2 m |
|
|
|
|
Welding |
|
|
Adjustment range |
3A - 220 A |
|
Duty cycle MIG / MAG - 40 °C |
35 % - 200 A |
|
Duty cycle MIG / MAG - 25 °C |
100 % - 220 A |
|
Ø Wire diameter |
0.8 - 1.0 mm (opz 0.6 - 1.0) |
|
Ø Flux cored wire |
0.9 - 1.2 mm |
|
Ø Aluminium wire |
0.8 - 1.0 mm |
|
Wire speed |
0.5 - 16 m / min |
|
N° rolls |
2 |
|
Wire spool diameter |
Ø 200 mm |
|
Synergic program |
19 |
|
Welding program memory location |
8 |
Technicalities
- "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
- Heavy duty and enviromental conditions, high service life
- CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
- Reduced dimensions and compact construction
- High temperature, shockproof, abrasion resistant plastic case
- Air flow ducting and fully encapsulated PC board to avoid dust contamination
- Linear controlled fan on demand
- Energy-saving inverter technology (built-in P.F.C. - power factor controller)
- Built-in wire feeder unit (2 rolls drive)
- Ø 200 mm wire spool compatible
- Welding polarity switch device
- Full digital and user-friendly control panel
- Welding parameters digital display
- Last job settings auto-storage at switch-off
- User-defined welding program storage capability (8 free memory locations)
- Lock-unlock function key protected by password
- Ideal for stick welding with multiple types of popular electrodes
- Built-in adjustable arc control features (hot start, arc force, antisticking)
- Synergic setting for optimal stick welding with multiple types of electrodes
- Reduced electromagnetic interference with lift start TIG welding
- 2/4 step operating mode
- Arc dynamic adjustment
- Perfect arc ignition (soft start - motor slope)
- Burn-back and droplet detachment correction
- Crater filler operating mode
- Synergic operations from databank (16 pre-set programs)
- Wire speed (0,5-16,0 m/min), amperage and piece thickness adjustment
- Spot welding mode
- Intermittent welding mode
