Technical Specification
|
General |
|
|
Welding processes |
MIG / MAG - PULSED MIG / MAG - MMA - TIG DC HF - TIG DC Lift |
|
Materials |
Carbon steels - Stainless Steels - Duplex Steels - Aluminum - Copper - Hardfacing |
|
Dimensions L x W x H |
690 x 290 x 510 mm |
|
Weight |
39.5 kg |
|
Power supply |
|
|
Voltage (50/60 Hz) |
3 x 400 / 230 V ± 15% |
|
Maximum input power |
22.9 / 23.9 kVA |
|
Maximum input current |
33.0 / 61.5 A |
|
Power factor PF |
0.95 |
|
Efficiency |
88 % |
|
Slow blow line fuse |
30 / 63 A |
|
Open circuit voltage |
73 Vdc |
|
IP protection rate |
IP23S |
|
Insulation class |
H |
|
Power supply cable |
4 x 4 mm2 - 5 m |
|
Welding |
|
|
Adjustment range |
3 - 500 A |
|
Duty cycle MIG / MAG - 40 °C |
50 % - 500 A |
|
Duty cycle MIG / MAG - 25 °C |
100 % - 470 A |
|
Ø Wire diameter (WF 4000) |
1.0 - 1.2 mm (opz 0.6 - 1.6) |
|
Ø Flux cored wire (WF 4000) |
1.2 - 2.4 mm |
|
Ø Aluminiumwire (WF 4000) |
0.8 - 1.6 mm |
|
Wire speed (WF 4000) |
0.5 - 22.0 m / min |
|
N° rolls (WF 4000) |
2 (4 opz) |
|
Wire spool diameter (WF 3000 / WF 4000) |
Ø 200 / 300 mm |
|
Synergic program |
80 |
|
Welding program memory location |
64 |
|
U/D TIG Torch compatible |
YES |
|
Digital Torch compatible |
YES |
|
U/D MIG/MAG torch compatible |
YES |
|
PUSH PULL torch compatible |
YES |
|
Remote Control compatible |
YES |
|
RapiDeep 2.0 compatible |
YES |
|
QuickPulse 2.0 compatible |
YES |
|
EN 1090 compatible |
YES |
|
Weld @ Net compatible |
YES |
|
Standard EasyArc |
YES |
Technicalities
- "Green @ wave" inverter technology for high energy effi ciency and perfect control over all welding phases
- High power at 100% of duty cycle
- Heavy duty and enviromental conditions, high service life
- CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
- Software based controls can be upgraded as new features become available
- High temperature, shockproof, abrasion resistant plastic case
- Air flow ducting and fully encapsulated PC board to avoid dust contamination
- Linear controlled fan on demand
- Energy-saving inverter technology (built-in P.F.C. - power factor controller)
- Wire feeder unit (2 / 4 rolls drive)
- Fully voestalpine Böhler Welding designed wire drive unit
- Full parameters control panel on wire feeder unit
- Ø 200 / 300 mm wire spool compatible
- Full digital and user-friendly LCD graphic display control panel
- Welding parameters digital display
- Last job settings auto-storage at switch-off
- User-defined welding program storage capability (64 free memory locations)
- Totally programmable user interface
- Programmable welding operations safety limits
- Lock-unlock function key protected by password
- Control of several welding units over Ethernet
- Totally welding process remote programming and management by PC network
- Ideal for stick welding with multiple types of popular electrodes
- Built-in adjustable arc control features (hot start, arc force, antisticking)
- Synergic setting for optimal stick welding with all types of electrodes
- Precise arc striking and high stability arc
- 2 / 4 step operating mode
- Arc dynamic adjustment
- Perfect arc ignition (soft start - motor slope)
- Burn-back and droplet detachment correction
- Crater filler operating mode
- Synergic operations from databank (80 pre-set programs)
- Wire speed (0,5 - 22,0 m / min), amperage and piece thickness adjustment
- Spot welding mode
- Intermittent welding mode
- MIG / MAG bilevel
- Smart slope control
- WU cooling unit compatible
- Controlled cooling operations
Certified welding procedure
Denne maskine tilbyder en nem og billig EN 1090 CE-mærke - så har du certificering på plads til svejs på stålkonstruktioner.
MIG/MAG Standard - 3.0 mm
|
|
Position |
Joint |
Base
|
Thickness
|
Validity
|
Consumable |
Diameter
|
Gas |
Program
|
Program
|
 |
PA | BW | Steel (≤S355J2) | 3.0 | 2.1 - 3.9 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
S1.007Ca S1.008Ca S1.009Cf |
3152.13 |
 |
PC | BW | Steel (≤S355J2) | 3.0 | 2.1 - 3.9 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
S1.007Cb S1.008Cb S1.009Cg |
3153.13 |
 |
PF | BW | Steel (≤S355J2) | 3.0 | 2.1 - 3.9 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
S1.007Cc S1.008Cc S1.009Ch |
3154.13 |
 |
PB | FW | Steel (≤S355J2) | 3.0 | 2.1 - 6.0 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
S1.007Cd S1.008Cd S1.009Ci |
3155.13 |
 |
PF | FW | Steel (≤S355J2) | 3.0 | 2.1 - 6.0 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
S1.007Ce S1.008Ce S1.009Cj |
3156.13 |
MIG/MAG Standard - 5.0 mm
|
|
Position |
Joint |
Base
|
Thickness
|
Validity
|
Consumable |
Diameter
|
Gas |
Program
|
WPS
|
|
PB | FW | Steel (≤S355J2) | 5.0 | 3.0 - 10.0 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
S1.007Ck S1.008Ck S1.009Ck |
3170.15 |
MIG/MAG Standard - 12.0 mm
Position |
Joint |
Base
|
Thickness
|
Validity
|
Consumable |
Diameter
|
Gas |
Program
|
WPS
|
|
|
PA | BW | Steel (≤S355J2) | 12.0 | 3.0 - 24.0 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
S1.007Cf S1.008Cf S1.009Ca |
3157.13 |
|
PC | BW | Steel (≤S355J2) | 12.0 | 3.0 - 24.0 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
S1.007Cg S1.008Cg S1.009Cb |
3158.13 |
|
PF | BW | Steel (≤S355J2) | 12.0 | 3.0 - 24.0 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
S1.007Ch S1.008Ch S1.009Cc |
3159.13 |
|
PB | FW | Steel (≤S355J2) | 12.0 | 6.0 - 24.0 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
S1.007Ci S1.008Ci S1.009Cd |
3160.13 |
|
PF | FW | Steel (≤S355J2) | 12.0 | 6.0 - 24.0 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
S1.007Cj S1.008Cj S1.009Ce |
3161.13 |
Pulsed MIG/MAG - 3.0 mm
Position |
Joint |
Base
|
Thickness
|
Validity
|
Consumable |
Diameter
|
Gas |
Program
|
WPS
|
|
|
PA | BW | Steel (≤S355J2) | 3.0 | 2.1 - 3.9 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
P1.007Ca P1.008Ca P1.009Cd |
3162.13 |
|
PC | BW | Steel (≤S355J2) | 3.0 | 2.1 - 3.9 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
P1.007Cb P1.008Cb P1.009Ce |
3163.13 |
|
PB | FW | Steel (≤S355J2) | 3.0 | 2.1 - 6.0 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
P1.007Cc P1.008Cc P1.009Cf |
3164.13 |
Pulsed MIG/MAG - 5.0 mm
Position |
Joint |
Base
|
Thickness
|
Validity
|
Consumable |
Diameter
|
Gas |
Program
|
WPS
|
|
|
PB | FW | Steel (≤S355J2) | 5.0 | 3.0 - 10.0 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
P1.007Cg P1.008Cg P1.009Cg |
3169.15 |
Pulsed MIG/MAG - 12.0 mm
Position |
Joint |
Base
|
Thickness
|
Validity
|
Consumable |
Diameter
|
Gas |
Program
|
WPS
|
|
|
PA | BW | Steel (≤S355J2) | 12.0 | 3.0 - 24.0 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
P1.007Cd P1.008Cd P1.009Ca |
3165.13 |
|
PC | BW | Steel (≤S355J2) | 12.0 | 3.0 - 24.0 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
P1.007Cc P1.008Cc P1.009Cb |
3166.13 |
|
PB | FW | Steel (≤S355J2) | 12.0 | 6.0 - 24.0 | G3 Si1 ER70-S |
0.8 1.0 1.2 |
82%Ar18%CO2 (M21) |
P1.007Cf P1.008Cf P1.009Cc |
3167.13 |
